cpu0: Geode(TM) Integrated Processor by National Semi (“Geode by NSC” 586-class) 267 MHz

Dies ist das erste, was der OpenBSD-Kernel auf meiner Soekris-Box von sich gibt. Ich habe endlich Zeit gefunden, ein System auf die Kiste zu installieren. Es gibt zwar schon ein paar fertige Distributionen für die Soekris-Geräte, doch ich wollte was eigenes bauen. Nachdem das ganze mit der CF-Karte sich als etwas umständlich erwies, habe ich einfach eine 2.5”-Festplatte in das Gerät eingebaut. Somit habe ich schon mal ein funktionsfähiges System.

Wer es ganz genau wissen möchte…

OpenBSD 3.6-current (GENERIC) #1: Sun Feb 13 01:09:00 CET 2005
root@horus.shadowrun.not:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi (“Geode by NSC” 586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem = 133799936 (130664K)
avail mem = 115752960 (113040K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 20/40/21, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing – function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 “Cyrix GXm PCI” rev 0x00
sis0 at pci0 dev 6 function 0 “NS DP83815 10/100” rev 0x00: DP83816A, irq 10, address 00:00:24:c3:5c:84
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 7 function 0 “NS DP83815 10/100” rev 0x00: DP83816A, irq 10, address 00:00:24:c3:5c:85
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 8 function 0 “NS DP83815 10/100” rev 0x00: DP83816A, irq 10, address 00:00:24:c3:5c:86
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
hifn0 at pci0 dev 10 function 0 “Hifn 7955/7954” rev 0x00: LZS 3DES ARC4 MD5 SHA1 RNG AES PK, 32KB dram, irq 11
gscpcib0 at pci0 dev 18 function 0 “NS SC1100 ISA” rev 0x00
gpio0 at gscpcib0: 64 pins
“NS SC1100 SMI/ACPI” rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 “NS SCx200 IDE” rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0:
wd0: 16-sector PIO, LBA48, 19077MB, 39070080 sectors
wd1 at pciide0 channel 0 drive 1:
wd1: 1-sector PIO, LBA, 124MB, 254464 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4
geodesc0 at pci0 dev 18 function 5 “NS SC1100 X-Bus” rev 0x00: iid 6 revision 3 wdstatus 0
ohci0 at pci0 dev 19 function 0 “Compaq USB OpenHost” rev 0x08: irq 5, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at gscpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: spkr0 at pcppi0
sysbeep0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1:
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask f3e5 netmask ffe5 ttymask ffe7
pctr: no performance counters in CPU
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Leave a Reply

Your email address will not be published.